Vol. 58 No. 3 (2022)

Published: 2022-06-29

RESEARCH AND DEVELOPMENT

SIMULATION AND COMPARISON OF STATCOM AND SVC IN THE STABILITY OF GRID-CONNECTED WINDFARM

Nguyễn Duy Minh

3
RESEARCH ON TWO-WAY POWER METERS USING IoT TECHNOLOGY

Trần Sinh Biên, Nguyễn Văn Tiến

10
CONTROLLER BASIS ON BACKSTEPPING FOR ALMEGA 16 ROBOT IN JOINT SPACE AND IN WORKSPACE

Võ Thu Hà

17
STUDYING OPERATING CHACTERISTICS OF LINE-START PERMANENT MAGNET SYNCHRONOUS MOTORS IN TEMPORARY OVER VOLTAGE TIME

Lê Anh Tuấn, Bùi Đức Hùng, Ninh Văn Nam, Phạm Văn Tuấn, Phạm Văn Nam

23
A METHOD OF SOLVING EQUATIONS OVER THE FINITE FIELDS USING THE SOLUSIONS OF AFFINE POLYNOMIALS

Phạm Khắc Hoan, Nguyễn Tiến Thái, Nguyễn Trung Thành

29
DESIGN SLIDING MODE CONTROLLER FOR MARINE RADAR SYSTEM USING A PERMANENT MAGNET SYNCHRONOUS MOTOR

Nguyễn Ngọc Tuấn, Trần Xuân Tình, Sái Văn Thuận, Lê Ngọc Sơn

35
SYNTHESIZING THE SPEED CONTROLLER OF PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MOTOR WITH THE BLOWER LOAD USING ADAPTIVE SLIDING CONTROL

Phạm Văn Cường, Hoàng Văn Huy, Nguyễn Đăng Toàn, Nguyễn Hữu Hải

39
SWOT ANALYSIS ON THE APPLICATION OF (PHOTOVOLTAIC/THERMAL) PV/T TECHNOLOGY IN VIETNAM

Nguyễn Trung Hiếu, Cao Xuân Thắng, Bùi Mạnh Tú, Vũ Minh Pháp, Phạm Văn Duy

45
CONVOLUTION NEURON NETWORK (CNN) AND VGG16 NETWORK ON REAL-TIME FACE RECOGNITION SYSTEM

Viên Thanh Nhã, Tiếp Sỹ Minh Phụng, Phạm Thành Công, Nguyễn Thanh Tùng, Lê Đinh Phú Cường

52
INVESTIGATION IN INFLUENCE OF SOME TECHNOLOGY PARAMETERS ON SUFACE ROUGHNESS OF SKD11 STEEL IN ELECTRIC DISCHARGE MACHINING USING COPPER ELECTRODE

Nguyễn Văn Đức, Vũ Đình Toàn

58
APPLYING TAGUCHI METHOD AND FUZZY GREY RELATIONSHIP ANALYSIS (FGRA) TO ANALYZE THE INFLUENCE OF CUTTING PARAMETERS ON TOOL WEAR WHEN HIGH-SPEED MILLING OF HARDENED STEEL

Lê Thế Hưng, Phạm Văn Bổng, Chu Khắc Trung, Hoàng Tiến Dũng

63
EVALUATION OF THE RELIABILITY OF SEMI-RIGID BEVELED STEEL FRAMES SUBJECTED TO WIND LOADS BY THE RANDOM FINITE ELEMENT METHOD

Phạm Trung Thành, Nguyễn Hồng Sơn, Vũ Thành Trung

68
RESEARCH FOR OPTIMIZATION OF CABIN STRUCTURAL OF LOCOMOTIVE "D19E INNOVATION" TO IMPROVE SAFETY FOR DRIVERS

Lê Thanh Sơn

73
DESIGN OF AN EXHAUST GAS RECIRCULATION COOLER BY ANSYS FLUENT

Khổng Vũ Quảng, Nguyễn Mạnh Phú, Nguyễn Khả Trường An, Nguyễn Minh Thắng

79
BUILDING A ACTIVE ELECTRO -HYDRAULIC ACTUATOR MODEL OF ANTI-ROLL BAR SYSTEM ON CARS

Phạm Trung Dũng, Nguyễn Minh Trung, Vũ Văn Tấn, Trương Mạnh Hùng

85
TILT ANGLE OF FLAT PLATE SOLAR COLLECTORS

Nguyễn Quốc Uy

91
EFFECT OF TIGHTNESS FACTOR ON LOOP GEOMETRICAL STRUCTURE OF SINGLE FABRIC KNITTED ON FLAT WEFT KNITTING MACHINES

Đào Thị Chinh Thùy, Lưu Thị Tho

98
STUDY ON THE EFFECTS OF THE NUMBER AND SET DISTANCE OF SEMI-FINISHED PRODUCTS ON THE SEWING TIME OF POLO-SHIRTS

Đinh Mai Hương, Phan Thanh Thảo

104
INFLUENCE OF PILE LOOPLENGTH ON THE TEMPERATURE SURFACE CHANGE OF PILE KNITTED FABRIC

Chu Diệu Hương

109
STUDY ON CHANGING OF PROPERTIES AFTER MULTIPLE WASHES OF CHILDREN'S CLOTHING IN RETAIL MARKET OF VIETNAM

Nguyễn Thị Kim Thu, Nguyễn Phương Ly

114
THE AESTHETICS OF THE QUAN HO BAC NINH AO DAI COSTUMES

Dương Thị Kim Đức

118
DESIGN INDUSTRY OVERVIEW AND ITS MANUFACTURING PROCESS IN VIETNAM

Phan Thị Phương Thảo, Hoàng Thanh Thủy

124
RESEARCH ON THE CHEMICAL COMPOSITION OF THE RADIATION RESISTANCE LAYER ON X-RAY PROTECTIVE APRON FOR MEDICAL USE

Lê Phúc Bình

129
STUDY ON PREPARATION OF ANTIBACTERIAL POLYMER FILM BASED ON POLYLACTIDE AND GREEN TEA POLYPHENOLS

Phạm Hồng Quyên, Mai Tùng Dương, Nguyễn Thanh Thảo, Tô Nguyễn Bảo Ngọc, Nguyễn Thị Nga, Lê Thị Hà Đông, Nguyễn Thị Thủy

133
STUDY ON EFFECTIVE CALCIUM ENRICHMENT FROM PHOSPHORUS WASTE SLAG FOR APPLICATION AS A FERTILIZER ADDITIVE

Phạm Thị Mai Hương, Chu Quí Thương, Phan Thị Quyên

137
ANTI-INFLAMMATORY AND INHIBITION OF ENZYME XANTHINE OXIDASE ACTIVITY OF SOME SPECIES OF GNETUM

Lê Thị Hồng Nhung

141
ON THE EXISTENCE FOR ANOMALOUS DIFFUSION EQUATIONS

Lâm Trần Phương Thủy

144

KINH TẾ-XÃ HỘI

FACTORS AFFECTING THE DECISION OF THE CAPITAL STRUCTURE OF THE BUSINESS: A CASE STUDY OF LISTED REAL ESTATE COMPANIES

Nguyễn Xuân Thắng, Nguyễn Minh Phương, Nguyễn Linh Giang, Bùi Thị Thu Loan

149
STRESS TESTING THE LIABILITY RISK RESISTANCE OF COMMERCIAL BANKS IN VIETNAM

Dương Thị Hoàn

157
REWARDING ACHIEVEMENTS FOR EMPLOYEES BY SHARES TO CONTRIBUTE ESOP, CURRENT SITUATION AND RECOMMENDATIONS IN VIETNAM

Nguyễn Thị Thu Thủy, Cao Thị Huyền Trang

162

Vol. 58 No. 3 (2022)

RESEARCH AND DEVELOPMENT

SIMULATION AND COMPARISON OF STATCOM AND SVC IN THE STABILITY OF GRID-CONNECTED WINDFARM

RESEARCH ON TWO-WAY POWER METERS USING IoT TECHNOLOGY

CONTROLLER BASIS ON BACKSTEPPING FOR ALMEGA 16 ROBOT IN JOINT SPACE AND IN WORKSPACE

STUDYING OPERATING CHACTERISTICS OF LINE-START PERMANENT MAGNET SYNCHRONOUS MOTORS IN TEMPORARY OVER VOLTAGE TIME

A METHOD OF SOLVING EQUATIONS OVER THE FINITE FIELDS USING THE SOLUSIONS OF AFFINE POLYNOMIALS

DESIGN SLIDING MODE CONTROLLER FOR MARINE RADAR SYSTEM USING A PERMANENT MAGNET SYNCHRONOUS MOTOR

SYNTHESIZING THE SPEED CONTROLLER OF PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MOTOR WITH THE BLOWER LOAD USING ADAPTIVE SLIDING CONTROL

SWOT ANALYSIS ON THE APPLICATION OF (PHOTOVOLTAIC/THERMAL) PV/T TECHNOLOGY IN VIETNAM

CONVOLUTION NEURON NETWORK (CNN) AND VGG16 NETWORK ON REAL-TIME FACE RECOGNITION SYSTEM

INVESTIGATION IN INFLUENCE OF SOME TECHNOLOGY PARAMETERS ON SUFACE ROUGHNESS OF SKD11 STEEL IN ELECTRIC DISCHARGE MACHINING USING COPPER ELECTRODE

APPLYING TAGUCHI METHOD AND FUZZY GREY RELATIONSHIP ANALYSIS (FGRA) TO ANALYZE THE INFLUENCE OF CUTTING PARAMETERS ON TOOL WEAR WHEN HIGH-SPEED MILLING OF HARDENED STEEL

EVALUATION OF THE RELIABILITY OF SEMI-RIGID BEVELED STEEL FRAMES SUBJECTED TO WIND LOADS BY THE RANDOM FINITE ELEMENT METHOD

RESEARCH FOR OPTIMIZATION OF CABIN STRUCTURAL OF LOCOMOTIVE "D19E INNOVATION" TO IMPROVE SAFETY FOR DRIVERS

DESIGN OF AN EXHAUST GAS RECIRCULATION COOLER BY ANSYS FLUENT

BUILDING A ACTIVE ELECTRO -HYDRAULIC ACTUATOR MODEL OF ANTI-ROLL BAR SYSTEM ON CARS

TILT ANGLE OF FLAT PLATE SOLAR COLLECTORS

EFFECT OF TIGHTNESS FACTOR ON LOOP GEOMETRICAL STRUCTURE OF SINGLE FABRIC KNITTED ON FLAT WEFT KNITTING MACHINES

STUDY ON THE EFFECTS OF THE NUMBER AND SET DISTANCE OF SEMI-FINISHED PRODUCTS ON THE SEWING TIME OF POLO-SHIRTS

INFLUENCE OF PILE LOOPLENGTH ON THE TEMPERATURE SURFACE CHANGE OF PILE KNITTED FABRIC

STUDY ON CHANGING OF PROPERTIES AFTER MULTIPLE WASHES OF CHILDREN'S CLOTHING IN RETAIL MARKET OF VIETNAM

THE AESTHETICS OF THE QUAN HO BAC NINH AO DAI COSTUMES

DESIGN INDUSTRY OVERVIEW AND ITS MANUFACTURING PROCESS IN VIETNAM

RESEARCH ON THE CHEMICAL COMPOSITION OF THE RADIATION RESISTANCE LAYER ON X-RAY PROTECTIVE APRON FOR MEDICAL USE

STUDY ON PREPARATION OF ANTIBACTERIAL POLYMER FILM BASED ON POLYLACTIDE AND GREEN TEA POLYPHENOLS

STUDY ON EFFECTIVE CALCIUM ENRICHMENT FROM PHOSPHORUS WASTE SLAG FOR APPLICATION AS A FERTILIZER ADDITIVE

ANTI-INFLAMMATORY AND INHIBITION OF ENZYME XANTHINE OXIDASE ACTIVITY OF SOME SPECIES OF GNETUM

ON THE EXISTENCE FOR ANOMALOUS DIFFUSION EQUATIONS

KINH TẾ-XÃ HỘI

FACTORS AFFECTING THE DECISION OF THE CAPITAL STRUCTURE OF THE BUSINESS: A CASE STUDY OF LISTED REAL ESTATE COMPANIES

STRESS TESTING THE LIABILITY RISK RESISTANCE OF COMMERCIAL BANKS IN VIETNAM

REWARDING ACHIEVEMENTS FOR EMPLOYEES BY SHARES TO CONTRIBUTE ESOP, CURRENT SITUATION AND RECOMMENDATIONS IN VIETNAM

Language

Make a Submission

Information

Tạp chí Khoa học Việt Nam Trực tuyến - Vietnam Journals Online