Vol. 88 (2023)

Overview

• Study on heat treatment of copper alloy for fabrication of specialized copper based items

  Nguyễn Văn Bằng, Ngô Minh Tiến, Phùng Khắc Nam Hồ, Nguyễn Thị Hoài Phương

  109-114

• Studying the effects of climate change on military areas and activities in Ben Tre province

  Nguyễn Thành Luân, Nguyễn Thị Ngọc Phượng, Bùi Hồng Hà, Nguyễn Thị Xuân Hồng

  101-108

• Research on application of Artificial neural network to predict high waves near the shore in Cua Dai sea area, Quang Ngai province

  Ngọc Vũ Văn, Hải Tạ

  147-153

• Study on fabrication of a device for finding viens and early detection of breast cancer using optical energy spectroscopy

  Thuấn Mai Hữu, Hùng Nguyễn Văn, Dr Hong Phuong Nguyen

  115-122

• Structural, electrical and optical properties of samarium fluoride doped SnO2 transparent conducting oxide thin films for optoelectronic device applications

  Van-Da Dao, Quang-Phu Tran, Van-Hoi Pham

  123-130

• New thyroid scintigraphy datasets: Construction and benchmark assessment in diagnosis of residual thyroid tissue

  Minh Lại, Nguyen Chi Thanh, Hai Phung Nhu, Dang Nam Thang, Trung Nguyen Thanh, Chu Minh Duc, Ha Nguyen Thai, Nguyen Duc Thuan

  131-138

• Study on modification of nanosilica by polydimethylsiloxane used to increase the mechanical and environmental strength of electromagnetic transparent coating

  Xuân Thạo Phạm, Đức Hà Ninh, Minh Trí Lê, Như Hoàn Phạm, Trần Thiêm Đặng, Minh Tuấn Phạm

  66-72

• Heparin - Pluronic F127 nanogel with optimal component ratio for drug delivery applications

  Dr Huong Nguyen Thi, Nguyen Ngoc Son, Trinh Dac Hoanh, Doan Van Phuc, Dam Thi Vui, Nguyen Thi Hai Yen, Pham The Chinh

  58-65

• Influence of process parameters on single track quality of 316L stainless steel by direct laser metal deposition (DLMD)

  Văn Ngụy Dương, Minh Tú Ngô, Văn Quân Nguyễn, Tài Hoài Thanh Nguyễn, Văn Văn Lê, Tatkhoa Doan

  154-161

• Optimization of roller burnishing process parameters using Taguchi and ANN methods

  Phúc Vương Mai, Tatkhoa Doan, Hải Nam Nguyễn, Văn Toàn Nguyễn

  139-146

• Fuzzy control to support CoAP for congestion avoidance in the Internet of Things networks

  Lê Thị Thùy Dương, Dang Hai Hoang, Phạm Thiếu Nga

  22-33

• Application of genetic algorithm for balancing control of hydraulic systems on specialized vehicles

  Trọng Khuyên Nguyễn, Cao Duc Sang Cao, Cao Duc Sang Cao, Hải Hà Vũ, Sĩ Dương Hồ, Đức Mạnh Nguyễn, Thế Dũng Quách

  42-50

• Research on the effects of some parameters of structural fuel on the thrust characteristics of cruise engine type “F-K”

  Bùi Tân, Nguyễn Thế Lực, Trịnh Xuân Hữu

  162-168

• Research and development of a kit for the rapid detection of cyanide in water using p-nitrobenzaldehyde and o-dinitrobenzene reagents

  Trí Nguyễn; Toán Vũ Ngọc, Minh Lê Hồng, Linh Tô Phương, Hương Nguyễn Thị Thu, Anh Hoàng Hữu, Hoan Lê Ngọc, Giang Nguyễn Thị Kim, Bổng Đoàn Văn

  81-86

• Research on fabrication of composite based on polyamide 6 matrix and chopped carbon fiber

  Thế Dũng Đinh, Trần Hùng Nguyễn, Nguyễn Hữu Đạt, Nguyễn Vũ Giang, Đức Dương Lã

  95-100

• Sliding mode control with a hybrid reference model in time-varying uncertain parameters and disturbance systems

  Dr Huy Vu Quoc, Nguyễn Vũ

  3-12

• Emotion recognition from EEG signal and health status assessment based on the intensity of the emotional impact

  Hải Bùi Huy, Lê Tuấn Đạt

  13-21

• The effectiveness of TNT yellow wastewater treatment by using Photo-Fenton process

  Văn Huống Nguyễn, Sơn Tùng Phạm, Minh Trí Lê, Thùy Dương Lê

  87-94

• Cow behavior classification: The optimal set of parameters for the random Forest algorithm

  Viet-Manh Do, Duc-Tan Tran, Thanh-Huyen Nguyen-Thi, Duc-Nghia Tran

  34-41

• Assessment of Cu and Zn pollution in surface sediments of Song Cau – Thai Nguyen city

  Hà Phạm

  73-80

• Research the option to determine the roll angle of a rotating unmanned aerial vehicle based on angular rate sensors combined with a single-axis stabilizer platform

  Hoàng Mạnh Tưởng, Lê Hải, Tuấn Anh Lê

  51-57

• A design solution for the 4-8 GHz bandpass interdigital cavity filter

  Biên Đặng Thị Thùy, Nguyễn Thanh Hà, Phùng Thị Thu Phương

  173-176

• Solutions for designing computers employed multiple performances based on ZYNQ foundation

  Hiếu Nguyễn Văn, Phạm Minh Thắng

  169-172

• Study on heat treatment of copper alloy for fabrication of specialized copper based items

  Nguyễn Văn Bằng, Ngô Minh Tiến, Phùng Khắc Nam Hồ, Nguyễn Thị Hoài Phương

  109-114

• Studying the effects of climate change on military areas and activities in Ben Tre province

  Nguyễn Thành Luân, Nguyễn Thị Ngọc Phượng, Bùi Hồng Hà, Nguyễn Thị Xuân Hồng

  101-108

• Research on application of Artificial neural network to predict high waves near the shore in Cua Dai sea area, Quang Ngai province

  Ngọc Vũ Văn, Hải Tạ

  147-153

• Study on fabrication of a device for finding viens and early detection of breast cancer using optical energy spectroscopy

  Thuấn Mai Hữu, Hùng Nguyễn Văn, Dr Hong Phuong Nguyen

  115-122

• Structural, electrical and optical properties of samarium fluoride doped SnO2 transparent conducting oxide thin films for optoelectronic device applications

  Van-Da Dao, Quang-Phu Tran, Van-Hoi Pham

  123-130

• New thyroid scintigraphy datasets: Construction and benchmark assessment in diagnosis of residual thyroid tissue

  Minh Lại, Nguyen Chi Thanh, Hai Phung Nhu, Dang Nam Thang, Trung Nguyen Thanh, Chu Minh Duc, Ha Nguyen Thai, Nguyen Duc Thuan

  131-138

• Study on modification of nanosilica by polydimethylsiloxane used to increase the mechanical and environmental strength of electromagnetic transparent coating

  Xuân Thạo Phạm, Đức Hà Ninh, Minh Trí Lê, Như Hoàn Phạm, Trần Thiêm Đặng, Minh Tuấn Phạm

  66-72

• Heparin - Pluronic F127 nanogel with optimal component ratio for drug delivery applications

  Dr Huong Nguyen Thi, Nguyen Ngoc Son, Trinh Dac Hoanh, Doan Van Phuc, Dam Thi Vui, Nguyen Thi Hai Yen, Pham The Chinh

  58-65

• Influence of process parameters on single track quality of 316L stainless steel by direct laser metal deposition (DLMD)

  Văn Ngụy Dương, Minh Tú Ngô, Văn Quân Nguyễn, Tài Hoài Thanh Nguyễn, Văn Văn Lê, Tatkhoa Doan

  154-161

• Optimization of roller burnishing process parameters using Taguchi and ANN methods

  Phúc Vương Mai, Tatkhoa Doan, Hải Nam Nguyễn, Văn Toàn Nguyễn

  139-146

• Fuzzy control to support CoAP for congestion avoidance in the Internet of Things networks

  Lê Thị Thùy Dương, Dang Hai Hoang, Phạm Thiếu Nga

  22-33

• Application of genetic algorithm for balancing control of hydraulic systems on specialized vehicles

  Trọng Khuyên Nguyễn, Cao Duc Sang Cao, Cao Duc Sang Cao, Hải Hà Vũ, Sĩ Dương Hồ, Đức Mạnh Nguyễn, Thế Dũng Quách

  42-50

• Research on the effects of some parameters of structural fuel on the thrust characteristics of cruise engine type “F-K”

  Bùi Tân, Nguyễn Thế Lực, Trịnh Xuân Hữu

  162-168

• Research and development of a kit for the rapid detection of cyanide in water using p-nitrobenzaldehyde and o-dinitrobenzene reagents

  Trí Nguyễn; Toán Vũ Ngọc, Minh Lê Hồng, Linh Tô Phương, Hương Nguyễn Thị Thu, Anh Hoàng Hữu, Hoan Lê Ngọc, Giang Nguyễn Thị Kim, Bổng Đoàn Văn

  81-86

• Research on fabrication of composite based on polyamide 6 matrix and chopped carbon fiber

  Thế Dũng Đinh, Trần Hùng Nguyễn, Nguyễn Hữu Đạt, Nguyễn Vũ Giang, Đức Dương Lã

  95-100

• Sliding mode control with a hybrid reference model in time-varying uncertain parameters and disturbance systems

  Dr Huy Vu Quoc, Nguyễn Vũ

  3-12

• Emotion recognition from EEG signal and health status assessment based on the intensity of the emotional impact

  Hải Bùi Huy, Lê Tuấn Đạt

  13-21

• The effectiveness of TNT yellow wastewater treatment by using Photo-Fenton process

  Văn Huống Nguyễn, Sơn Tùng Phạm, Minh Trí Lê, Thùy Dương Lê

  87-94

• Cow behavior classification: The optimal set of parameters for the random Forest algorithm

  Viet-Manh Do, Duc-Tan Tran, Thanh-Huyen Nguyen-Thi, Duc-Nghia Tran

  34-41

• Assessment of Cu and Zn pollution in surface sediments of Song Cau – Thai Nguyen city

  Hà Phạm

  73-80

• Research the option to determine the roll angle of a rotating unmanned aerial vehicle based on angular rate sensors combined with a single-axis stabilizer platform

  Hoàng Mạnh Tưởng, Lê Hải, Tuấn Anh Lê

  51-57

• A design solution for the 4-8 GHz bandpass interdigital cavity filter

  Biên Đặng Thị Thùy, Nguyễn Thanh Hà, Phùng Thị Thu Phương

  173-176

• Solutions for designing computers employed multiple performances based on ZYNQ foundation

  Hiếu Nguyễn Văn, Phạm Minh Thắng

  169-172