No. 3 (2025): Tạp chí Xây dựng

Published: 2025-03-19

TRỌN BỘ

Tạp chí Xây dựng số 3/2025

Tổng Biên tập Nguyễn Thái Bình

SCIENTIFIC RESEARCH

A Study on cross-section design to ensure the traffic safety for road tunnels in urban and rural areas

TS NGUYỄN HỮU DŨNG

47
Research on small capacity salted water treatment technology for home use using solar energy

THS NGUYỄN TIẾN DŨNG, THS NGUYỄN THÀNH MẬU

52
Analysis of the influence of transverse connections on the vibration response of girder bridge structures subjected to moving vehicle loads

THS NGUYỄN THỊ KIM LOAN, PGS.TS NGUYỄN XUÂN TOẢN, PGS.TS ĐẶNG CÔNG THUẬT, PGS.TS NGUYỄN DUY THẢO

58
Analysis of the current status of investment preparation works at the construction investment project management board of tan chau town, an giang province

TS ĐỖ THỊ MỸ DUNG, THS LÊ THẾ ANH

62
Organizing and managing project contracts Design-Bid-Build (DBB)

PHẠM QUỐC ANH, NGUYỄN NGỌC THANH2

66
Proposal for sustainable transport development management solutions towards a lowcarbon economy in Ben Tre City

THÁI THANH TUẤN, TS.KS PHẠM THỊ MINH LÀNH

70
Orientation of the model for connecting traditional craft village tourism and regional tourism in the Red river delta

TS NGUYEN HOAI THU, TS NGUYEN THU HUONG

76
Study on using rice husk ash from ceramic kiln as a partial alternative for cement in mortar

LE HOAI BAO PhD, NGO VAN THUC PhD, NGUYEN VAN XUAN PhD, TRAN QUANG HUY MSc

82
Identifying the causes of delay in industrial factory construction: A case study in Binh Duong, Vietnam

THS NGUYỄN ĐỨC TUẤN, THS NGUYỄN KHẮC QUÂN

86
Efect of fly ash combined crumb rubber aggregate on the properties of mortar

NGUYỄN THỊ BÍCH THỦY, TRẦN THÚC TÀI, NGUYỄN HOÀNG HUYỀN TRÂN, NGUYỄN NGỌC NGHYM, TRẦN CAO MINH

92
Comparative analysis of shear capacity of reinforced concrete beams according to design standards

TS TRẦN TRUNG HIẾU

96
ANSYS based analysis of low density rc slab with metal meshing

MSC HUYNH HAN PHONG

102
Expanding the sea space of the city, lessons from the experience of Rach Gia city, Kien Giang province

THS.KTS.NCS ĐỖ CÔNG TÚ, KS ĐỖ VĂN PHÉP

107
Integrating finite element method with multi-objective metaheuristic optimization algorithms for solving space truss structures

KS NGUYỄN NGÔ CÔNG PHÁP, PGS.TS TRƯƠNG ĐÌNH NHẬT, PGS. TS NGUYỄN HỮU ANH TUẤN, THS LÊ THỊ THÙY LINH

110
Developing a steel structure bidding support model in Vietnam

PHAN QUỐC THÁI, LÊ ANH TUẤN, HỒ THỊ QUỲNH CHÂU, VÕ TIẾN ĐẠT

115
Effect of Geological Stratification on Soil Liquefaction Potential: A Laboratory Study

TS TRẦN ĐỒNG KIẾM LAM, PGS. TS NGUYỄN VĂN HIẾU, THS NGUYỄN ĐỨC KHIÊM, GS SUNG-SIK PARK

120
Factors Affecting Digital Transformation in General Construction Enterprises

TS TRẦN VĂN KHÔI, TS DƯƠNG NGỌC QUANG

125
Offsite construction logistics management strategies in Vietnam: An AHP approach

TÔ THỊ HƯƠNG QUỲNH, NGUYỄN PHƯƠNG CHÂM

130
Numerical simulation of axial compressive behavior of circular composite columns made of NSC filled in prefabricated UHPC tube

LÊ HOÀNG AN

135
Evaluation of the impact of technical infrastructure upgrading on the stability of the Tra Cu dyke in Tra Vinh province

NGUYỄN HIẾU BÌNH, PHẠM HỮU HÀ GIANG

140
Using Lagrange method for static analysis of plane truss with inaccurate fabricated member lengths

TS PHẠM VĂN ĐẠT

145
Analysis of different perspectives on quality of supervision consultants in construction projects

NGUYỄN HOÀI NGHĨA

152
Experimental study on the material model of the stress - strain relationship of lightweight concrete using lightweight aggregates from construction and demolition wastes

TS LÊ NGỌC LAN

157
Developing housing for Ethnic minorities in the Northern mountainous region while preserving traditional architectural values

PGS.TS NGUYỄN ĐÌNH THI, THS NGUYỄN NGỌC HƯƠNG

164
Development of pile bearing capacity prediction model based on O-cell test data using ANN machine learning

TS VÕ NGUYỄN PHÚ HUÂN, THS PHẠM ĐINH TRUNG NGHĨA

169
Determining the optimal parameters of a single-bucket excavator based on operating conditions

TS TRẦN ĐỨC HIẾU

172

No. 3 (2025): Tạp chí Xây dựng

TRỌN BỘ

Tạp chí Xây dựng số 3/2025

SCIENTIFIC RESEARCH

A Study on cross-section design to ensure the traffic safety for road tunnels in urban and rural areas

Research on small capacity salted water treatment technology for home use using solar energy

Analysis of the influence of transverse connections on the vibration response of girder bridge structures subjected to moving vehicle loads

Analysis of the current status of investment preparation works at the construction investment project management board of tan chau town, an giang province

Organizing and managing project contracts Design-Bid-Build (DBB)

Proposal for sustainable transport development management solutions towards a lowcarbon economy in Ben Tre City

Orientation of the model for connecting traditional craft village tourism and regional tourism in the Red river delta

Study on using rice husk ash from ceramic kiln as a partial alternative for cement in mortar

Identifying the causes of delay in industrial factory construction: A case study in Binh Duong, Vietnam

Efect of fly ash combined crumb rubber aggregate on the properties of mortar

Comparative analysis of shear capacity of reinforced concrete beams according to design standards

ANSYS based analysis of low density rc slab with metal meshing

Expanding the sea space of the city, lessons from the experience of Rach Gia city, Kien Giang province

Integrating finite element method with multi-objective metaheuristic optimization algorithms for solving space truss structures

Developing a steel structure bidding support model in Vietnam

Effect of Geological Stratification on Soil Liquefaction Potential: A Laboratory Study

Factors Affecting Digital Transformation in General Construction Enterprises

Offsite construction logistics management strategies in Vietnam: An AHP approach

Numerical simulation of axial compressive behavior of circular composite columns made of NSC filled in prefabricated UHPC tube

Evaluation of the impact of technical infrastructure upgrading on the stability of the Tra Cu dyke in Tra Vinh province

Using Lagrange method for static analysis of plane truss with inaccurate fabricated member lengths

Analysis of different perspectives on quality of supervision consultants in construction projects

Experimental study on the material model of the stress - strain relationship of lightweight concrete using lightweight aggregates from construction and demolition wastes

Developing housing for Ethnic minorities in the Northern mountainous region while preserving traditional architectural values

Development of pile bearing capacity prediction model based on O-cell test data using ANN machine learning

Determining the optimal parameters of a single-bucket excavator based on operating conditions

Language

Information

Tạp chí Khoa học Việt Nam Trực tuyến - Vietnam Journals Online