Vol. 57 No. 5 (2021)

Published: 2022-01-17

RESEARCH AND DEVELOPMENT

QUANTITATIVE EVALUATION OF BACK-TO-BACK CAPACITOR SWITCHING TRANSIENT CONTROLS AT POWER SUBSTATION

Ma Thị Thương Huyền, Vũ Hoàng Giang, Đoàn Văn Đạo

3
ELECTROMAGNETIC INVESTIGATION OF EXTERIOR ROTOR V-SHAPE PERMANENT MAGNET MOTORS FOR E-SCHOOTERS BY A FINITE ELEMENT TECHNIQUE

Bui Minh Dinh, Dang Quoc Vuong

8
IMPROVE POWER PLANT CONTROL QUALITY TO STABILIZE THE GRID SYSTEM

Nguyen Thi Nga

12
RESEARCH SWITCHING OVERVOLTAGES IN LOW VOLTAGE NETWORKS IN VIET NAM AND PROPOSED LIMITED SOLUTIONS

Ninh Văn Nam, Nguyễn Mạnh Quân

16
A FLEXIBLE CONTROL METHOD APPLIED TO A VSC-HVDC INTEGRATING TO OFFSHORE WIND FARMS

Nguyễn Hữu Đức

22
INTELLIGENT DOOR CONTROL USING FACE RECOGNITION

Đoàn Thị Hương Giang

28
SYNTHESIS OF SLIDING CONTROLLER ON BASIS LINER QUADRATIC REGULATOR FOR AIR-ROD DRIVE SYSTEM

Nguyễn Ngọc Tuấn, Đặng Tiến Trung, Trần Xuân Tình, Nguyễn Trọng Hà

34
DEVELOP AUTONOMOUS CAR SYSTEM USING ARTIFICIAL INTELLIGENCE

Hà Thị Kim Duyên, Lê Mạnh Long, Nguyễn Đức Duy, Phan Sỹ Thuần, Nguyễn Ngọc Hải, Nguyễn Thị Tú Uyên, Ngô Mạnh Tiến

38
MINIMAL TOTAL TRANSMIT POWER IN RELAY WIRLESS TRANSISSION NETWORK USING SPECTRAL OPTIMIZATION TECHNIQUE

Trần Đình Thông, Dư Đình Viên, Trần Xuân Phương

44
FACENET MODEL APPLICATION IN THE CONSTRUCTION AND DEVELOPMENT OF FACE RECOGNITION SYSTEM AT HANOI UNIVERSITY OF INDUSTRY

Phạm Việt Anh, Lê Xuân Hải, Vương Trung Hiếu

49
FLOW FLUCTUATIONS AND FLUID DYNAMICS IN GEROTOR LUBRICATION PUMPS OF AGRICULTURAL MACHINERY

Nguyễn Duy Long, Nguyễn Thùy Dương, Trương Công Giang

56
PREDICTING THE EFFECTS OF CUTTING PARAMETERS AND FLOW RATES, PRESSURES OF MINIMUM QUANTITY LUBRICATION (MQL) ON CUTTING FORCE AND SURFACE ROUGHNESS IN MILLING OF HARDENED STEEL S50C ON 5-AXIS CNC MACHINING CENTER

Nguyễn Thành Công, Nguyễn Chí Bảo, Nguyễn Như Tùng, Phạm Thị Thiều Thoa, Nguyễn Văn Cảnh, Hoàng Tiến Dũng

63
A STUDY ON CREATION OF TiN COATING ON CUTTING TOOL BY VACUUM ARC DEPOSITION METHOD

Đặng Quốc Việt, Nguyễn Đức Luận, Đặng Thái Hòa, Phạm Đức Cường

71
A SIMULATION STUDY ON PERFORMANCE AND EMISSION CHARACTERISTIC OF BIOGAS ENGINE CONVERTED FROM CONVENTIONAL DIESEL ENGINE

Trần Công Minh, Nguyễn Đức Khánh, Nguyễn Phi Trường

75
A STUDY ON DESIGN AND MANUFACTURE THE IGNITION TIMING CONTROL SYSTEM FOR ONE CYLINDER ENGINE

Bùi Văn Chinh, Nguyễn Văn Vinh, Lê Văn Anh

80
RESEARCH OF DESIGN AND DURABILITY ASSESSMENT OF AUTOMOBILE WHEEL RIMS

Nguyễn Quang Cường, Nguyễn Thành Công, Phạm Thị Thanh Nhàn

84
DESIGN CIRCUIT TO DISPLAY SIGNALS SENSOR IN COMBUSTION ENGINE CONTROL SYSTEMS ON LCD SCREEN

Lê Đức Hiếu, Vũ Ngọc Quỳnh, Thân Quốc Việt

90
DESIGNING THE FRAME OF 35-SEATER BUSES ACCORDING TO VIETNAMESE STANDARDS AND ACCORDANCE WITH DOMESTIC PRODUCTION TECHNOLOGY

Nguyễn Hồng Quân, Nguyễn Xuân Tuấn

94
COMBINATION OF ENERGY AND BIOCHAR PRODUCTION FROM AGRICULTURAL RESIDUES

Trần Văn Bẩy, Cao Thị Anh Ngọc, Nguyễn Hồng Nam

100
EXPERIMENTAL STUDY OF A THERMO-OSCILLATING TWO-PHASE HEAT TRANSFER DEVICE FOR WATER PUMPING

Bùi Mạnh Tú

106
THE APPLICATION OF TRANSFORMATION OPTICS IN THERMAL METAMATERIALS DESIGN

Trịnh Bích Ngọc, Phan Minh Thụy, Nguyễn Đức Trung, Nguyễn Tuấn Linh, Phạm Thế Văn, Nguyễn Đức Nam, Dương Quang Hà

113
MAKING MANNEQUIN ACCORDING TO BODY SIZE OF FEMALE STUDENT’S HANOI UNIVERSITY OF INDUSTRY, APPLYLING PATTERN DESIGN IN GARMENT

Nguyễn Văn Du

119
ESTABLISH CLOTHING SIZE SYSTEM - GIRL STUDENT UNIFORM IN HANOI UNIVERSITY OF INDUSTRY

Phạm Thị Huyền

122
INVESTIGATION OF THE CONTENTS OF ESSENTIAL OIL, EXTRACTABLE MATERIALS, Z-LIGUSTILIDE AND FERULIC ACID FROM ANGELICA ACUTILOBA AND THEIR ANTIFUNGAL ACTIVITY AGAINST PLANT FUNGI

Vũ Văn Điền, Nguyễn Quang Tùng, Nguyễn Hà Trang, Đỗ Văn Phúc, Nguyễn Thị Thanh Hương, Lê Thị Hương, Nguyễn Hữu Tùng, Lê Đăng Quang

127
STUDY ON THE POSSIBILITY OF COMBINED TREATMENT OF ELECTROPLATING WASTEWATER AND DOMESTIC WASTEWATER USING ANOXIC/OXIC (A/O)

Trần Đức Thảo, Phạm Minh Tuấn

133
CONSTRUCT CALIBRATION CURVE FOR DETERMINING ACETONITRILE BY GAS CHROMATOGRAPH

Trần Mạnh Thắng, Lê Thị Thu Hiền, Mai Đức Minh, Đàm Thị Tâm

141

KINH TẾ-XÃ HỘI

FACTORS AFFECTING QUALITY SATISFACTION OF TRAINING SERVICES AT HANOI COLLEGES OF INDUSTRIAL ECONOMICS

Đồng Trung Chính

145
RESEARCH ON RESPONSIBILITIES FOR FINANCIAL STATEMENTS IN VIETNAMESE IRRIGATION AND DRAINAGE MANAGEMENT COMPANIES

Hoàng Thị Mai Lan, Vũ Lê Long

151
CORPORATE SOCIAL RESPONSIBILITY AND BRAND ATTITUDE: CASE OF A TECHNOLOGICAL ENTERPRISE IN THE COVID PANDEMIC

Vũ Thị Thanh Bình, Đỗ Minh Thành, Nguyễn Thị Thanh Loan

158

Vol. 57 No. 5 (2021)

RESEARCH AND DEVELOPMENT

QUANTITATIVE EVALUATION OF BACK-TO-BACK CAPACITOR SWITCHING TRANSIENT CONTROLS AT POWER SUBSTATION

ELECTROMAGNETIC INVESTIGATION OF EXTERIOR ROTOR V-SHAPE PERMANENT MAGNET MOTORS FOR E-SCHOOTERS BY A FINITE ELEMENT TECHNIQUE

IMPROVE POWER PLANT CONTROL QUALITY TO STABILIZE THE GRID SYSTEM

RESEARCH SWITCHING OVERVOLTAGES IN LOW VOLTAGE NETWORKS IN VIET NAM AND PROPOSED LIMITED SOLUTIONS

A FLEXIBLE CONTROL METHOD APPLIED TO A VSC-HVDC INTEGRATING TO OFFSHORE WIND FARMS

INTELLIGENT DOOR CONTROL USING FACE RECOGNITION

SYNTHESIS OF SLIDING CONTROLLER ON BASIS LINER QUADRATIC REGULATOR FOR AIR-ROD DRIVE SYSTEM

DEVELOP AUTONOMOUS CAR SYSTEM USING ARTIFICIAL INTELLIGENCE

MINIMAL TOTAL TRANSMIT POWER IN RELAY WIRLESS TRANSISSION NETWORK USING SPECTRAL OPTIMIZATION TECHNIQUE

FACENET MODEL APPLICATION IN THE CONSTRUCTION AND DEVELOPMENT OF FACE RECOGNITION SYSTEM AT HANOI UNIVERSITY OF INDUSTRY

FLOW FLUCTUATIONS AND FLUID DYNAMICS IN GEROTOR LUBRICATION PUMPS OF AGRICULTURAL MACHINERY

PREDICTING THE EFFECTS OF CUTTING PARAMETERS AND FLOW RATES, PRESSURES OF MINIMUM QUANTITY LUBRICATION (MQL) ON CUTTING FORCE AND SURFACE ROUGHNESS IN MILLING OF HARDENED STEEL S50C ON 5-AXIS CNC MACHINING CENTER

A STUDY ON CREATION OF TiN COATING ON CUTTING TOOL BY VACUUM ARC DEPOSITION METHOD

A SIMULATION STUDY ON PERFORMANCE AND EMISSION CHARACTERISTIC OF BIOGAS ENGINE CONVERTED FROM CONVENTIONAL DIESEL ENGINE

A STUDY ON DESIGN AND MANUFACTURE THE IGNITION TIMING CONTROL SYSTEM FOR ONE CYLINDER ENGINE

RESEARCH OF DESIGN AND DURABILITY ASSESSMENT OF AUTOMOBILE WHEEL RIMS

DESIGN CIRCUIT TO DISPLAY SIGNALS SENSOR IN COMBUSTION ENGINE CONTROL SYSTEMS ON LCD SCREEN

DESIGNING THE FRAME OF 35-SEATER BUSES ACCORDING TO VIETNAMESE STANDARDS AND ACCORDANCE WITH DOMESTIC PRODUCTION TECHNOLOGY

COMBINATION OF ENERGY AND BIOCHAR PRODUCTION FROM AGRICULTURAL RESIDUES

EXPERIMENTAL STUDY OF A THERMO-OSCILLATING TWO-PHASE HEAT TRANSFER DEVICE FOR WATER PUMPING

THE APPLICATION OF TRANSFORMATION OPTICS IN THERMAL METAMATERIALS DESIGN

MAKING MANNEQUIN ACCORDING TO BODY SIZE OF FEMALE STUDENT’S HANOI UNIVERSITY OF INDUSTRY, APPLYLING PATTERN DESIGN IN GARMENT

ESTABLISH CLOTHING SIZE SYSTEM - GIRL STUDENT UNIFORM IN HANOI UNIVERSITY OF INDUSTRY

INVESTIGATION OF THE CONTENTS OF ESSENTIAL OIL, EXTRACTABLE MATERIALS, Z-LIGUSTILIDE AND FERULIC ACID FROM ANGELICA ACUTILOBA AND THEIR ANTIFUNGAL ACTIVITY AGAINST PLANT FUNGI

STUDY ON THE POSSIBILITY OF COMBINED TREATMENT OF ELECTROPLATING WASTEWATER AND DOMESTIC WASTEWATER USING ANOXIC/OXIC (A/O)

CONSTRUCT CALIBRATION CURVE FOR DETERMINING ACETONITRILE BY GAS CHROMATOGRAPH

KINH TẾ-XÃ HỘI

FACTORS AFFECTING QUALITY SATISFACTION OF TRAINING SERVICES AT HANOI COLLEGES OF INDUSTRIAL ECONOMICS

RESEARCH ON RESPONSIBILITIES FOR FINANCIAL STATEMENTS IN VIETNAMESE IRRIGATION AND DRAINAGE MANAGEMENT COMPANIES

CORPORATE SOCIAL RESPONSIBILITY AND BRAND ATTITUDE: CASE OF A TECHNOLOGICAL ENTERPRISE IN THE COVID PANDEMIC

Language

Make a Submission

Information

Tạp chí Khoa học Việt Nam Trực tuyến - Vietnam Journals Online